D24T.com  

Go Back   D24T.com > Technical Discussion Area > Performance and aftermarket

Reply
 
Thread Tools Display Modes
  #1  
Old 09-20-2015, 01:31 PM
lowandsmokey lowandsmokey is offline
Junior Member
 
Join Date: Aug 2015
Posts: 15
Default How much bhp/torque tuned stock pump

Wondering roughly how much extra power a fully stock tuned fuel pump will give

So far I've turned the max fuel screw in a little and messed with the lda, iI can feel the difference, just curious what sorta bhp increase this can give

My cars a 94 940tic

Thanks
Reply With Quote
  #2  
Old 09-21-2015, 04:53 AM
anders anders is offline
Supporting Member
 
Join Date: Jul 2010
Location: NW Washington USA
Posts: 831
Default

The ve pump with the stock 10mm plunger and stock cam plate with fuel limiting screw and LDA adjusted/maxed out it will flow around 200-220 HP worth of fuel.
There is much to do on the engine to get that power though.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646
NA intake manifolds and 240 turbo pans for sale.
Need d24 or d24t parts? PM me!
Shipments done on fridays!

1982 242 D24+T/M46- Super pumped! Build thread:
http://www.d24t.com/showthread.php?t=1545
1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734
Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745
Reply With Quote
  #3  
Old 09-23-2015, 04:02 AM
lowandsmokey lowandsmokey is offline
Junior Member
 
Join Date: Aug 2015
Posts: 15
Default

Quote:
Originally Posted by anders View Post
The ve pump with the stock 10mm plunger and stock cam plate with fuel limiting screw and LDA adjusted/maxed out it will flow around 200-220 HP worth of fuel.
There is much to do on the engine to get that power though.
Wow! That's a lot more than I thought it could flow.
So far I've turned the max fuel screw in a little, fiddled with the lda spring and grinded the profile of the pin about 3-4mm steeper. 1.1 bar boost and feels a lot quicker.

Wanting to go further though, what do you suggest?
I'm thinking bigger nozzles, helps keep the smoke down apparently

Thanks for answering ha was worried people don't check this anymore
Reply With Quote
  #4  
Old 09-23-2015, 07:28 AM
1488 1488 is offline
Junior Member
 
Join Date: Mar 2015
Location: Estonia
Vehicle: 945 D24TIC
Posts: 16
Default

I have never seen anyone having bigger injectors on a D24T engine, even the guys with 12mm pump and hx35, rather have they increased the opening pressure. And to clear the smoke you could just increase boost. If your engine is in good health and has a intercooler 1.5 Bar should be safe.

Last edited by 1488; 09-23-2015 at 07:37 AM.
Reply With Quote
  #5  
Old 09-24-2015, 01:22 AM
lowandsmokey lowandsmokey is offline
Junior Member
 
Join Date: Aug 2015
Posts: 15
Default

Quote:
Originally Posted by 1488 View Post
I have never seen anyone having bigger injectors on a D24T engine, even the guys with 12mm pump and hx35, rather have they increased the opening pressure. And to clear the smoke you could just increase boost. If your engine is in good health and has a intercooler 1.5 Bar should be safe.
seen a few posts about Monark nozzles, slightly bigger and also, higher pop pressure.
Ran 1.5 for a week, seen so many comments about the heads blowing on these I'm keeping it a little lower for now, plenty for the amount of fuel I'm at for the moment.
Having a little trouble keeping the idle down, thinking I need to pivot the throttle plate
Reply With Quote
  #6  
Old 09-24-2015, 07:24 AM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default

Quote:
Originally Posted by lowandsmokey View Post
seen a few posts about Monark nozzles, slightly bigger and also, higher pop pressure.
Not so sure about the Monarks being bigger, but more about being the "GTD" design, and of better quality than currently available replacement Bosch nozzles that are made in China or India.

Size of the current IP or nozzles is not the limiting factor.

What do you mean by higher pop pressure? Higher end of spec range or higher than spec? Benefits/drawbacks?
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote
  #7  
Old 09-24-2015, 02:48 PM
lowandsmokey lowandsmokey is offline
Junior Member
 
Join Date: Aug 2015
Posts: 15
Default

Quote:
Originally Posted by ngoma View Post
Not so sure about the Monarks being bigger, but more about being the "GTD" design, and of better quality than currently available replacement Bosch nozzles that are made in China or India.

Size of the current IP or nozzles is not the limiting factor.

What do you mean by higher pop pressure? Higher end of spec range or higher than spec? Benefits/drawbacks?
Ah right, my injectors should he fine for now then. Previous owner has em down in the service history as being checked e.t.c. Recently

Not sure if higher than spec but deffinetly at the higher end if not slightly above for more efficient combustion with heavy fueling I think... I'm trying to read up/learn as much as possible about tuning this engine before getting too deep ha

Saw some injector stuff here - http://d24t.com/showthread.php?t=292
Reply With Quote
Reply

Tags
d24, d24tic, fuel pump, horsepower, stock

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 01:39 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.