|
#1
|
|||
|
|||
Gasket
Please help with info if you can.
...GASKETS 1. where to buy the exhaust gasket? It is where the exhaust pipe comes up towards the engine/turbo then connects. 2. One of GASKETs for the cooling system. It is where the upper hose is.... where hot water leaves the head, there is a housing with a gasket. 3. Other gaskets near turbo and egr area I'll name them later. 4. Vacuum pump o-ring still not found (reinz sealant worked fine w old gasket) Thx |
#2
|
|||
|
|||
Quote:
I got one from a local independent Volvo repair shop.
__________________
1985 744 gle d24t 1985 745 gle d24t |
#3
|
|||
|
|||
2.5 or 3 inch diameter?
Im not near the car currently but would like to order it.
I found 2 links but not sure which one works for the d24-t https://www.ebay.com/itm/Garrett-T3-...e/142798987663 Or https://www.ebay.com/itm/Garrett-T3-...e/142798985142 Or none of the above ? Last edited by RedArrow; 01-19-2019 at 03:07 PM. |
#4
|
|||
|
|||
To my recollection it is 2.5".
Definitely looks like it needs a new one there. With that much soot escaping I would look for possible excess backpressure in the exhaust also, though, maybe a plugged muffler or resonator. Is all the black on the inner fender there from leaking exhaust? Even if this gasket goes bad I would not expect to see that much leakage in this location unless there is a restriction downstream.
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
#5
|
|||
|
|||
|
|
|