#1
|
|||
|
|||
d24 vacuum pump
hi all
has anyone here used a different type of vacuum system to make the vacuum work i.e. a belt driven or electric vacuum i thought i had read something somewhere . my vacuum pump is so noisy now when engine ticking over and at low speed.i disconnect vacuum hose and engine just purrs really good for a 240000 mile engine . all advice most grateful |
#2
|
|||
|
|||
Volvo, Volkswagen, Audi Diesel Pierburg Vacuum Pump Rebuild
https://thosbryant.wordpress.com/201...-pump-rebuild/ Otherwise, somebody was talking about using the electric vacuum booster pump from a 940 or 960 on this forum no too long ago; you'll find it if you look around for it.
__________________
1985 744 gle d24t 1985 745 gle d24t |
#3
|
|||
|
|||
I have taken a liking to Electric vac pumps found on 2001 or newer Volvo P2 platforms. they are triggered by a vac pressure switch, which allows the pump to run when needed. MUCH better than stupid mechanical cam driven pump which is always in the way.
__________________
Redblocks are fun and easy but Greenblocks take skill. '79 245 with D24TIC + M47 |
#4
|
|||
|
|||
Thanks for the info Slobodan. What did you use as a blockoff plate and how did you seal it?
__________________
1985 744 gle d24t 1985 745 gle d24t |
#5
|
|||
|
|||
940 tdi auto 1995
hi slododan
do you have any photos of your vacuum pump project? would be most grateful if you have . regards jim |
|
|