|
#1
|
|||
|
|||
I think its fun that someone likes d24 this much, that he puts so much money in it.
Its keeping the D24 engine alive!! For a while ago i called someone here in sweden that had a D24 machined to 2.8 litre, he claimed it was 1,9 pistons in it, brand new cylinder head, the best version with hydraulics lifters. The engine was not started, and he wanted 10 000SEK, very cheap. Only the cylinder head with cam, lifters and valves costs about 11 000sek Maybe sometime in the future, i will build me a engine, if i come over brand new crank and cylinder head, im searching like a maniac. H- profile RODS can be bought from Sten parner in sweden, wich pistons i will use im unsure about, but not original, those are crap, you know what i mean. As a turbo I would prefer a mitsubishi 19t with 3inch exhausthouse, in my eys this is one of the best turbos in the world, mitsubishi original turbos are outstanding when it comes to power and realibty, love it! I think the manifold is good. But i dont understand the injection pump to well, so i would send it to DIESELMEKEN here in sweden. When it comes to the block i would O-ring it and use volvos original steel gasket 1.6mm made by elring, this is the best. But the dream engine is 1HD-FT, the biggest 6cyl turbodiesel engine made for a car, not a truck. Regards Martin friman |
#2
|
||||
|
||||
Quote:
As I posted though, a 1.9 piston wouldn't get you to a 2.8 liter... It would be just under a 2.6. There isn't enough deck height to accomidate a longer stroke, so I don't see this as a possibility. Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#3
|
|||
|
|||
I didnt say anything about 2.8 litre, just that i would want to use other pistons then original, if i build me a D24 engine!
|
#4
|
||||
|
||||
I was just saying that whoever said they built a D24 that was a 2.8 liter with 1.9 pistons wasn't correct...
Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#5
|
|||
|
|||
Now i know something you guys dont know Its correct that the engine is 2.8 litre, its original piston in it, 75,5mm or is it 76,5mm? The secret is the crank, its a very rare original crank thats was used only in cars made 1991-1992 in belgium. Dont know if it was made by vw or volvo. I want one of those cranks!!
The guy in the movie bought the engine from a scrap yard in Österrike, with broken timing belt. Dont know anything more, so dont ask me for further question, i know it seems like like a lie, because i never heard or seen one of these cranks, but the guy seems very honest. Regards Martin Friman |
#6
|
||||
|
||||
I would have to see it to believe it. With the original bore of 76.5mm, you would you would have to stroke it WAY out to get 2.8 liters. There isn't enough block deck height to accomidate that.
Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#7
|
|||
|
|||
Quote:
Could you try searching around for additional information on this mystery crank? Was the crank used in the VW LT vehicles? I recall there being mention of a 2,8L diesel engine in those. I had always thought it was not a D24 ... but maybe it was? Naturally a link to a page on the web would be very beneficial on this part, thanks.
__________________
Jim 1985 Volvo 740 GLE turbo diesel |
#8
|
|||
|
|||
I have heard about that some MAN heavy light truck has a 3,5 with the same design on the outside and have 120-130 horsepower without turbo and 160 with? That had been a machine in the volvo!
|
#9
|
|||
|
|||
Quote:
|
#10
|
|||
|
|||
Its bigger!
|
|
|