#1
|
|||
|
|||
Feeler: D24/D24T Stockpile Part-out
I just want to see how much interest there is in the parts I have listed with my 245 sale thread. I'd prefer not to ship if I don't have to (especially for the big items). Some of the small things can be shipped, but international shipping is a maybe at this point. Local pickup/delivery in Southern California would be ideal though. Chime in if you see anything you want, and make an offer. If I can get most of the major parts called for, I will go this route. Thanks for looking!
Here are the parts I have: -D24T out of an '82 760 (unknown condition) -set of 4 MSW 15x7 mesh alloy wheels -ebay same-side inlet/outlet intercooler -Mercedes T3 turbo (.48 A/R hot side) from 300D -RX-7 T3 turbo compressor (.60 A/R cold side) -3 starters (2 known to work) -2 D24 metal radiators (unknown condition) -2 water pumps (unknown condition) -D24 injection pump (unknown condition) -New D24 glow plug relay -Set of new Total Seal gapless piston rings -New fuel pipe (PN: 1257150) -Seal ring (PN: 1257809-2) -Rubber seal (PN: 1246522) -New Bosch fuel filter -4 New Fram air filters for D24 -3 timing belts, one in box -injection pump belt -original head unit -D24 wiring harness -newish-looking upper water inlet -various hoses (like-new condition) -new ISSPRO water temp gauge -spare bulbs -spare Sylvania headlamp -1.5 quarts Optilube ULSD fuel treatment
__________________
1984 245 D24/M46, not running 1982 D24T Project Motor Acquired! |
#2
|
|||
|
|||
not to nit pick but im looking for a d24t long block
|
#3
|
|||
|
|||
Would you post the IP to UK? If so, how much, and is it a turbo pump with the boost compensation?
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO. http://i103.photobucket.com/albums/m...AG0269-sig.jpg |
#4
|
|||
|
|||
I will be sending a PM.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646 NA intake manifolds and 240 turbo pans for sale. Need d24 or d24t parts? PM me! Shipments done on fridays! 1982 242 D24+T/M46- Super pumped! Build thread: http://www.d24t.com/showthread.php?t=1545 1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734 Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745 |
#5
|
|||
|
|||
Okay...what would you call what I'm selling?
Quote:
PM replied
__________________
1984 245 D24/M46, not running 1982 D24T Project Motor Acquired! |
#6
|
|||
|
|||
I will be driving from Seattle to San Diego and back in March, and would be interested in picking up a few items along the way if you still have any. (Small bits -- starters, water pumps, fuel pipe, gaskets, water neck etc.) If those have not been taken by then, I would like to work out a deal. Probably will be in the SoCal region just about one month from now.
Anders, if there is anything you would want picked up in part of this, I might be able to grab that too...
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
#7
|
|||
|
|||
haha. noo. i ment i didnt want to try and pick parts out of your whole setup. but all i need is a long block.
|
#8
|
|||
|
|||
Quote:
__________________
1984 245 D24/M46, not running 1982 D24T Project Motor Acquired! |
#9
|
|||
|
|||
hey did you get my message? im interested in the turbo long block
|
#10
|
|||
|
|||
2.400 Tic engine block
Quote:
|
|
|