![]() |
#21
|
|||
|
|||
![]()
Any progress been made to the car?
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646 NA intake manifolds and 240 turbo pans for sale. Need d24 or d24t parts? PM me! Shipments done on fridays! 1982 242 D24+T/M46- Super pumped! Build thread: http://www.d24t.com/showthread.php?t=1545 1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734 Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745 |
#22
|
|||
|
|||
![]()
Thanks for asking, Anders. Not much progress in the last month or so because I've been busy working on the boat and fishing. Got the boat hauled and just about winterized, so I'll be getting back to work on the car soon. I have the head disassembled and cleaned. Next , I'll lap the valves and reassemble. I will post my progress.
|
#23
|
|||
|
|||
![]()
5years went by....
How is the motor? |
#24
|
|||
|
|||
![]()
I'm back and ready to complete the job. Everything is removed from the engine and all replacement parts are in. I had a hell of a time removing the bolt for the harmonic balancer. I don't have the special tool for that, so I used a strap wrench around the pulley and a breaker with a four foot pipe attached. The first strap wrench from Harbor Freight broke its rubber strap, but had success with an old webbed one I have from my Army days. Now all that needs to be done before reassembling the engine is lap four leaky valves and reassemble the cylinder head. This thing is leaving my garage soon, whether on her own power or by hook.
|
#25
|
|||
|
|||
![]() Quote:
![]()
__________________
1985 744 gle d24t 1985 745 gle d24t |
#26
|
|||
|
|||
![]()
Ngoma--I'm thinking of making a tool for that when the time comes.
One weird thing I noticed on the cooling fan is one of the blade tips is broken off. Should the fan be replaced? |
#27
|
|||
|
|||
![]()
Fanhttp://d24t.com/attachment.php?attachmentid=1133&stc=1&d=151976679 2
|
#28
|
|||
|
|||
![]()
Yes you should replace that fan. Safety and/or balance issues. What condition are the motor mounts in?
__________________
1985 744 gle d24t 1985 745 gle d24t |
#29
|
|||
|
|||
![]() Quote:
I just need to plan a few d24 projects myself but we'll figure out how and when to have " a d24 meet. " |
#30
|
|||
|
|||
![]()
Ngoma-- The motor mounts seem pretty solid and there's no damage around the fan shroud. So it's a mystery as to why only one blade would be broken. I've been looking around for replacement fan, but to no avail. If anyone knows where there's one available, I'd be interested.
RedArrow-- Thank you for offering to lend the tools-very nice of you! It will be a while before I get to that point. Right now I'm having issues with the four valves sealing for cylinders 5 and 6 in the replacement cylinder head. I tried lapping them twice, but they're not passing my compressed air test. I'm still getting tiny bubbles. The surfaces on the valves and seats look good, so it could be that I need new valves, seats or springs. Next I'll get out the books for specs and take measurements. I didn't want to get this technical, but just can't, in good conscience throw things back together knowing there are deficiencies that can be corrected within reason. The other valves are sealing good though. Could it be possible that the compressed air is popping open the valve a bit? I'm blowing about 100psi into the ports with a less than airtight seal around the air nozzle and port. Is there a better way to check the valves? |
![]() |
|
|