|
#1
|
|||
|
|||
Valve Shims
Does anybody have experience using the vw/audi diesel shims with our cars?I'm looking to do valve adjustment. I have a set of shims but it is incomplete and some of the shims are in bad shape from being left in moisture for some time by PO. Once I measure all I would like to be able to get correct ones without waiting too long. Here is a link to the shims via FCP: https://www.fcpeuro.com/products/aud...shim-056109569
__________________
1985 744 D24T M46 49mm t3 @20psi 280k |
#2
|
|||
|
|||
I have used shims from FCP before.
Even older gasser vws use same shims. |
#3
|
|||
|
|||
Great, thanks! That will make this much easier if a little more expensive.
__________________
1985 744 D24T M46 49mm t3 @20psi 280k |
#4
|
|||
|
|||
d24,d24t valve shims and other d24/d24t part numbers
My engines use the 31mm (diameter) shims.
This was one of my shim orders here, all came from FCP, it took a long time to search and confirm, back then... All of them worked. (all shims on the list are 31mm in diameter) I matched the part numbers with shim sizes for everyone to see. See pictures below. There are some useful d24, d24t part numbers there also! Order by this list if you wish. Happy diesel-bricking! PS. I would love to have the Wahler thermostat part number (87C for d24, d24t) and our d24(-t) waterpump part number (waterpump with cast impeller) Thanks. Last edited by RedArrow; 02-05-2017 at 03:44 PM. Reason: pictures added |
#5
|
|||
|
|||
Thanks, I actually just placed my order with FCP before looking at this but they are the CRP shims. Only concern is I saw somewhere that d24t had 33mm shim, I forgot to measure. Oh well, we'll see. I got a waterpump with metal impeller from rockauto, can get p# for you.
__________________
1985 744 D24T M46 49mm t3 @20psi 280k |
#6
|
|||
|
|||
I used an Airtex pump: AIRTEX AW9071
__________________
1985 744 D24T M46 49mm t3 @20psi 280k |
|
|