D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-08-2016, 11:30 AM
DrSpanky DrSpanky is offline
Junior Member
 
Join Date: Jul 2015
Posts: 15
Default Volvo Fuel Tank Pump/Sender

Does anyone have a picture of the sender unit for a Volvo 740 diesel my understanding is that the level sender and the housing should have 8mm and 6mm barbs to match the cars pipes.

The one on my 740 has what looks like 12mm and 8mm and extra wires.... so my assumption is that someone has fitted a petrol one. If the fuel is low it's hard to start and before I looked at it had loads of air line adapters to make the pipes match the car (and also a big loop of pipe, dunno why)

Any how I remove the loop replaced the pipe work with ones rated for fuel.... and not airline and used proper adapters. Since this it's now harder to start with a lower fuel level.

Now my guess is that it had the petrol unit with an in tank lift pump and that's not been wired in. So I'm hoping someone has some pictures of a diesel unit so I can modify the petrol one to match the diesel one (once I have ran the fuel down).


Any pics, thoughts or suggestions welcome

Dan
__________________
Silver Volvo 740 Tic m46 estate - Daily Driver
Green Volvo 940 TIC m90 estate - Drift Project
Purple Volvo 940 2.3 Auto LPT - Spares
Based in the UK

Super Turbo Diesel project
https://drive.google.com/drive/folde...GA?usp=sharing
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 07:24 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.