#1
|
|||
|
|||
Valve Shims
Where can I get a mixed set of valve shims for a reasonable price?
My cars always sounded 5-cylindery when warm. After getting injectors checked and putting on a completely different pump (rebuilt and 12mm) it actually seems worse. Compression are all a bit low, but between 260-300 on my cheap tester (might not be accurate - just bought it to see any major differences between cylinders). So, I'm wondering if it's the valves not sealing properly when hot, if some of them are a bit tight on clearance? I did check them several years ago, and they weer in spec, although one was right on the edge of spec. I couldn't find anywhere to get a new one though.
__________________
1990 Volvo 765 D24Tic (factory UK spec Tic). Monark 273 nozzles 163bar, Ajusa MLS gasket, 16psi, Water Injection, 17" Titans with 25mm H&R spacers, running 85% WVO/SVO. http://i103.photobucket.com/albums/m...AG0269-sig.jpg |
#2
|
|||
|
|||
Did you try your internet browser of choice? This popped up on the first search page on mine:
https://www.brickwerks.co.uk/other-v...nce-shims.html
__________________
1985 744 gle d24t 1985 745 gle d24t |
|
|