![]() |
#1
|
|||
|
|||
![]()
Goodday,
Thought I'll show some pics of my 740. ![]() ![]() ![]() I call her Beppe because its an old car who always tries to take care of me, Beppe means Grandma in Frisian. The engine made more than a million Km's (from my old 740) rest of the car 700.000km's Engine : D24t Intake : N/A of VW LT Turbo : stock turbo @ 1.7 bar Gearbox : Placed a M90 because of this : https://www.youtube.com/watch?v=CVeCq95r5kI Fuel pump : Screwed up like a morron. Air filter : Stock airbox with Pipercross air filter element. Intercooler : Ebay intercooler with china piping Last edited by Brekizer; 09-26-2017 at 03:45 AM. |
#2
|
|||
|
|||
![]()
Nice to see another D24T equipped vehicle
![]() ![]() /Dennis |
#3
|
|||
|
|||
![]() Quote:
Later I'm going to powdercoat my valve cover, distribution cover and intake, don't know what colour yet ![]() Last edited by Brekizer; 09-02-2017 at 12:16 AM. |
#4
|
|||
|
|||
![]()
Well, I've fucked up.
I found out that my slave cylinder was leaking, that's why I couldn't bleed it. So just remove it, place my backup cylinder and everythings fine hé? No, I couldn't remove my old slave cylinder, I've never seen anything so stuck ![]() I used loosening oil, I've tried to turn it with a big set of pliers and eventually I've tried to tap it with a small hammer.. I didn't use heat because everything is a bit oily on the underside of my car, we've had a fire before.. don't want it again. The result : ![]() ARRGHHG ![]() ![]() Even when the part is broken off, I still can't remove it.. not even in the vice and with a bigger hammer.. it won't budge. So yeah, now I need to create something that will hold the new slave cylinder.. |
#5
|
|||
|
|||
![]()
Small update :
Found a piece a metal and I'm fabricating a slave cylinder holder out of it ![]() |
#6
|
|||
|
|||
![]()
Any progress on the slave-cylinder-situation? I hope you sort it out
![]() |
#7
|
|||
|
|||
![]()
She's up and running again!
Testing if de plate fits : ![]() Milled a hole in it for the slave cylinder -edges still rough from grinder but sanded it afterwards- ![]() ![]() Painted, fitted and up and running! ![]() They aren't the best pics but at least you can see what's what ![]() Now I need to work out the intercooler, especially what kind of intercooler would be best.. Anyone got a part number of the Iveco intercooler? Last edited by Brekizer; 09-10-2017 at 11:25 PM. Reason: Adjusted size of photo's |
#8
|
|||
|
|||
![]()
my new intercooler :
![]() |
#9
|
|||
|
|||
![]()
I've fitted my intercooler
![]() ![]() ![]() I don't really notice allot of difference, or even a difference.. ![]() She pulls just as strong as always? ![]() ![]() And for the fun of it, I've cleaned her up a little bit. ![]() @ Dennis, pics of a clean engine bay are coming later, didn't had time to do so ![]() |
#10
|
|||
|
|||
![]()
Had my car on the rolling road today,
![]() not disappointed : ![]() But not enough. I need to fit my GTD nozzles, and I want a 12mm pump heads, but where to find it? |
![]() |
|
|