#1
|
|||
|
|||
Installing monark nozzles.
Hello,
I am rebuilding my D24Tic completely, so I am also swapping nozzles as the old ones was very bad. I got myself a set of new Monark 39 305 138 that I found here on the Forum, and I am going to set the pop pressure to 2400psi, but I don't know where to get the shims needed.. Can someone help me out? Also, as the pop pressure are set higher, the timing of the pump should probably be a little different? What timing is preferred with the new nozzles? Best regards -E.Winjum |
#2
|
|||
|
|||
Variable 24 Pc. Diesel Fuel Injector Pressure Adjustment Shim Washer Kit
Mercedes diesel injector SHIM related data Injector Shims Injector Shimming and Calibration
__________________
1985 744 gle d24t 1985 745 gle d24t |
#3
|
|||
|
|||
Thanks alot!
|
#4
|
|||
|
|||
injector refurb,clean,adjust
great info. thank you.
|
Thread Tools | |
Display Modes | |
|
|