View Single Post
  #1  
Old 01-20-2010, 04:51 PM
Eli Eli is offline
Member
 
Join Date: Jun 2009
Posts: 39
Default How'd you Intercool your D24T?

*** Please keep this thread uncluttered by keeping discussion to a minimum. I would like this to be a "how to" resource with pics and info only. Thanks, Jason***


Since this is an obvious improvement over stock, and so many people seem interested in this modification, I though I'd start a thread showcasing installs.

I'll start.

The car in question is a '79 245 - D24T+ic. More info can be found Here.

I converted to a D24 N/A intake manifold and N/A valve cover (for oil fill location) Then used an eBay 3" intercooler, eBay 2.5" intercooler piping kit, custom fabbed mounting brackets, Silicone 90 degree bending reducers on intake and turbo outlet, cut down intake hoses from a F150 (for bending reducers) on intercooler. I ran out of pre-bent pieces and had to have the bend under the battery pan done. It is not mandrel, so it will be replaced at some point.









I think it turned out pretty nice.




How did you do yours??
Reply With Quote