View Single Post
  #2  
Old 09-24-2009, 05:11 AM
lalozf lalozf is offline
Member
 
Join Date: Sep 2009
Location: Toledo, SPAIN
Posts: 79
Default

these are the screws that cost me more, and was beginning to break them when and gone to a gagrage to call for help, he got a screw driver, hammer and wrench to the screw hitting and turning the wrench at the same time , and voila, there are two screws to release to remove the black ramp of the inner zone.

when you remove the screws there is a bolt to be drawn with hammer quietly, but do not remove it entirely, only to release the ramp and we can get. Bolt projection is above and beyond the ramp (do the whole picture and be mindful of the positions of the parts)

for this access (allen cap above) we take carefully with tweezers the rod. and then the aluminum threaded washer, unscrew

This is the rod.

and here the entire source of our problems this plastic washer, which embraces the rod behind the washer screw, is removed along with a bent clip.
__________________
Volvo 760 GLE TD 1984
Volvo S60 D5 2005
Miata Mk2,5 SC M45 2002
Reply With Quote