Quote:
Originally Posted by 1488
I have never seen anyone having bigger injectors on a D24T engine, even the guys with 12mm pump and hx35, rather have they increased the opening pressure. And to clear the smoke you could just increase boost. If your engine is in good health and has a intercooler 1.5 Bar should be safe.
|
seen a few posts about Monark nozzles, slightly bigger and also, higher pop pressure.
Ran 1.5 for a week, seen so many comments about the heads blowing on these I'm keeping it a little lower for now, plenty for the amount of fuel I'm at for the moment.
Having a little trouble keeping the idle down, thinking I need to pivot the throttle plate