940 tdi auto 1995
hi 745 turbo greasel
which is the best method to try and engage C.S.device end is it when engine is cold first thing or hot do i need engine running too while i try to perform this task
i forced the cam arm slighty tonight then moved ball stud so idle was about 1000 RPM . then took car for a run when i got back C.S. had released the advance and idle speed was about 850 RPM and gap between ball stud. but cam had not quite travelled back to stop on I.P. so do i need to set C.S. so cam travels right back to I.P. stop plate.
hope i have not made a hash of trying to explain what i have done and need to do .
|