Here are some photos and brief descriptions of D24 Special Tools.
For working on IP, IP belt, IP timing, Cogged cam pulley, Injector lines:
Collection 2.jpg
From top to bottom:
Dogleg 17mm offset wrench w/ 1/2" socket for torque wrench. Easier wrenching of rear cam pulley and IP pulley nuts. Volvo tool P/N reads 9995201
Offset 17mm.jpg
Cam pulley holder. Holds cam pulley stationary while tightening/loosening nut. Also rotates pulley on camshaft to adjust IP timing.
Cogged Cam Pulley Holder.jpg
Closeup of P/N 9995199 21 AF-1134
Cogged Cam Pulley Holder close.jpg
Injector line wrench. Should be able to reach all of them with this wrench! Hazet tool P/N 4560
Injector line wrench.jpg