Quote:
Originally Posted by Texidor1
3. I just bled the whole system; still no start.
|
What do you mean by "bled the whole system." Did it include bleeding the injector hard lines?
Quote:
Originally Posted by Texidor1
4. The two wires to the IP:
One is yellow and the other blue.
The way they are setup (yellow) is not giving 12v to the upper plug (fuel solenoid); but is giving (blue) 12v to the bottom plug (altitude).
If I switch them (yellow and blue), the car does not crank at all. :[
|
So those wires are probably not the correct ones. Find the ones that behave as explained
in post #7 above.
You stated new GPs but are they all getting +12VDC during the glow period?
Have you studied the
Hard Starting sticky?