Hi everyone.
I do my Headgasket yesterday, Car is still not heating.
(see other Thread from me)
Feed Pipe to heater Valve is Hot, (Heater valve is new), Behind the HEater Valve: hose is Hot to, but the Hose, which comes out from the heater matrix (Return pipe) - Cold.
Ais should be bleeded out...
I think the Heater Matrix is sealed by "Coolant Sealing" which may be applied by the Pre-Owner...
BUT ! ::
When i blow Water in the Inlet, Water cames out (slowly) on the Return pipe...
Control Cables are all OK, and do their work (I checked it)
Now my Question.-Wanna Change the Heater Matrix
I know , if a AC is Present, the Interior must be completely disassembled, to gain Access to the heater core.
I Have the Standard Heater, without Everything...
Is it possible, to remove Accelerator Pedal, Brake Pedal, and remove the 2 Hoses, and slide the Heater Core out ?
Every thread i found about heater core Change... everyone has a AC
Greetings
This one i Have :
And here i marked it Red, the Cover i want to remove, remove the Pedals, and Try to slide the Heater out...