These are the parts that I need:
- fuel strainer that goes inside the fuel tank.
I will take a look to see what I got.
- injector overflow lines.
I use 1/8" fuel line
- adapter for the dial indicator to tune the injection pump. I got the gauge, need the adapter to setup the gauge to the pump.
I do not have a spare
- (both) the cooling hoses attach to a part into the pump. I need that part. Do not know the name. Also, that part holds the throttle spool.
I should have all of those.
- rear sprocket-gear of the camshaft. Must have two male notches to hook to the camshaft. The one in my engine is similar to the pump sprocket-gear. Does not have the notches.
The sprocket does not have notches. It stays in time/ in place from friction, I time all my engines by rotating that sprocket.
- fuel line that goes from the filter (output) to the injection pump (input).
Do you have the banjo fittings?
- Connection pipe. (part 1328448). It is plastic. It holds the return cooling line to the injection pump.
I'm not exactly sure what this is.
Please help me.
You may call or txt me at 904-304-0523.
I will try sending you a text when I get a chance.
|