Yes, that seems to be the common method for fabbing the head locating dowels. My suggestion was just to not make them too long.
Two of the mounting holes in the waterpump are slotted in an arc, which allows it to pivotally swing in and out to tension and detension the TB. Don't make it too tight. Should be able to twist the TB almost 90deg by using just a few fingers.
__________________
1985 744 gle d24t
1985 745 gle d24t
Last edited by ngoma; 03-11-2019 at 09:38 PM.
Reason: Correction: Two, not one, slotted mounting holes.
|