MBC have plugged as shown in the scheme below, to the hose 1 from post above. However, the turbo did not respond to the shooting mbc, blows to 0.7 bar, and so holds. The valve itself is OK, this type only regulates the flow of air through each other and that it works. Air flow through the tee toward the wastegate. Blowing from the wastegate and mbc in cold side turbo lack of routes, which probably good, just as I blow from the cold air that goes to the wastegate and mbc. All kind of okay, and the lack of regulation.
__________________
now: 480S, 480 Collection 158, 744 USA FK+ M90, 744 USA, 245 USA D24T+ +IC, 850 T-5R, 945 FK, 440, 460
ex: 745 USA FT, 480S, 3x480ES, 2xV70I, 945 D24TIC, 440
|