This one shows the other side of the clutch disk with the splines and spring setup. I've never seen a disk with this type of spring setup. Since I can't seem to find this exact one, will the non-Sachs disks work that don't have this spring setup. I can get them from O'Riley, Autozone or AutohausAZ. There is actually one from AutohausAZ that is the correct one but it's $215.
Next are the throw-out bearing:
This one shows the wear on the bearing that corresponds to the wear on the pressure plate springs. The bearing still appears to be in good condition; it turns freely and has no wear other than on the contact surface with the pressure plate. Is it reusable? I think it is, or at least to be saved for future use.