It had 2 exhaust valves that were too tight by .10 mm. Not horrible but I wanted to go through and check everything over since I don't know when the clearances were checked last. There was no symptoms as they still fully closed.
I now need to sort out the fuel supply system, the reason I ended up getting this car. It's sounds like it has a history of staring issues because of air getting into the system. I just did a quick fix with a check valve on the inlet side of the filter just to get it off the trailer and into the shop, but it's always started since.
I'm going to run a new hard line from tank to the firewall.
I need to get it up to top notch shape as this will be my daily driver.
|