Hi !
I need help !
I've started for the first time my engine (a d24 rebuilt by a engines machine shop owner (a machinist?) and it run like crap !
-It is difficult to start
-it doesn't want to take rpm
-it's smoking like Fidel Castro
-it's shaking like a junky on rehab
It looks like it runs on 3 cylinders....
The machinist said me it was not able to take rpm too yet.(like me now)
After i bought it, i did ALL the things that are supposed to be made to maintain it except the gaskests (wich are new) like timing belts injection pump setting, water pump etc....
I have changed the injection pump because of what he said me about the fact it didn't take rpm, thinking it was because of his "pump rebuild" work.
I've used the special tools to work on the timing belt and the pump.
I THINK i have te pulley of the injection pump turned once or twoo between the dismantling and the remounting.that could explain all the smoke caused by the three others not burning fuel and puking out in the exhaust no ?
Could it be that or the flywheel not bolted exacltly where it should ?
i mean displaced of one hole (but in this case i should have twisted all the valves or even felt the blockage when i moved it by hand first no ? (i don't think but huh i have not a lot of experience
THE VIDEO OF THIS: (and HOW I FEEL RIDICULOUS AND STUPID.... I'm supposed to know what i'm doing....
[video=youtube;5kgSKn1PBDg]http://www.youtube.com/watch?v=5kgSKn1PBDg[/video]