I personally believe it's too big.
Will you be running a larger plunger in the pump?
I ran my old 244 d24T+IC with the injection pump maxed out (180-220hp) With a turbonetics super 60 turbo. I don't remember the compressor specs off hand (largest t3 compressor) but it had a .48 AR exhaust housing and a 49mm exducer.
I did some testing on back pressure, at 25psi boost I got ~40 psi back pressure.
It was a great turbo for mid range performance and great spool up in everyday driving. You could jump up to a .63 AR and up the exducer a bit to gain some top end HP but loosing out on bottom-mid range.
|