View Single Post
  #1  
Old 07-15-2014, 03:44 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default D24 Special Tools

Here are some photos and brief descriptions of D24 Special Tools.

For working on IP, IP belt, IP timing, Cogged cam pulley, Injector lines:
Collection 2.jpg

From top to bottom:

Dogleg 17mm offset wrench w/ 1/2" socket for torque wrench. Easier wrenching of rear cam pulley and IP pulley nuts. Volvo tool P/N reads 9995201
Offset 17mm.jpg

Cam pulley holder. Holds cam pulley stationary while tightening/loosening nut. Also rotates pulley on camshaft to adjust IP timing.
Cogged Cam Pulley Holder.jpg

Closeup of P/N 9995199 21 AF-1134
Cogged Cam Pulley Holder close.jpg

Injector line wrench. Should be able to reach all of them with this wrench! Hazet tool P/N 4560
Injector line wrench.jpg
__________________
1985 744 gle d24t
1985 745 gle d24t

Last edited by ngoma; 07-15-2014 at 04:02 PM.
Reply With Quote