Quote:
Originally Posted by ngoma
You can drill a small hole (1/8") at the end of each crack...
After repair (by welding or replacement w/ upgraded crossmember), you can add these crossmember reinforcements.
These came standard on 960s, so maybe you can find some at a JY.
|
I really enjoyed the quality photos of cracks+the repairs in this great thread. I went through it several times, saying `what the hell... is it soo common?` then I decided to see my crossmember...
I`ll take your advice: drill, weld, inspect again... while I will be trying to locate a pick-and-pull junkyard nearby. Thank you for the quick answer, it is very helpful!