View Single Post
  #4  
Old 10-24-2017, 10:35 AM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default

Female spade connector on the brown wire that runs to the GP relay connects to the temperature sensor at the rear of the head. It slides onto the round disc standing off the end of the sensor, just slides on perpendicularly. It provides input to the GP relay logic, to determine whether to energize the GPs at start or not.

The other water temp. sensor, near the front of the head by #1 GP is for the instrument panel temp. gauge.

Attached photos of the rear bussbar. The bends allow it to thread thru the IP mounting bracket. The #6 GP connection is slotted open to ease removal/install. The small nut on the GP terminal just needs to be loosened, not entirely removed (and lost!).

http://d24t.com/attachment.php?attac...1&d=1508869984

http://d24t.com/attachment.php?attac...1&d=1508870006
Attached Images
File Type: jpg P1020678.JPG (151.0 KB, 19 views)
File Type: jpg P1020680.JPG (152.5 KB, 12 views)
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote