View Single Post
  #2  
Old 10-23-2017, 09:36 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default

Sorry the (relatively) simple injectors R/R job went south on you. I'm trying to imagine how or what kind of hole punch could be used to pull out the injector heat shields.

Another tool you will want (if you do not have it already): 12mm x 1.75 pitch bottoming thread tap. You really want to get those head bolt holes cleaned up well. Spend extra time to get any liquids or other crud out of the bottom of the holes.

Also, cut the tops off of a few of your old head bolts to use as locator posts when lowering the head onto the block. Helps keep the gasket in position.

Quote:
Originally Posted by neilsontom3000 View Post
...and there's been photo hosting probs and images being zapped....
I think you're describing linked photos hosted on Photobucket, where Botofucket recently demanded ransom to continue displaying linked photos. Looks like you did good by using the Forum's attachment feature.
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote