Thread: Best Nozzles?
View Single Post
  #6  
Old 05-12-2016, 04:41 AM
anders anders is offline
Supporting Member
 
Join Date: Jul 2010
Location: NW Washington USA
Posts: 831
Default

I believe that any of the stock nozzles are more then capable of flowing what a max 10mm head/rotor can put out. As far as higher pop pressures, I could only assume the higher the pop pressure there might be a very slight decrease in fuel injected per stroke of the plunger. As the pressure rises there is more of a chance of the fuel getting pushed past the control collar and the mating surfaces of the plunger and head itself, it would be very minimal though.

The injectors will remain open as long as it's needed to inject the specific quantity of fuel the IP is suppling, whether it be at 130 bar, 155 bar or 180 bar.
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646
NA intake manifolds and 240 turbo pans for sale.
Need d24 or d24t parts? PM me!
Shipments done on fridays!

1982 242 D24+T/M46- Super pumped! Build thread:
http://www.d24t.com/showthread.php?t=1545
1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734
Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745
Reply With Quote