View Single Post
  #7  
Old 10-20-2017, 04:36 PM
Hendo Hendo is offline
Member
 
Join Date: Sep 2015
Posts: 54
Default

As you know, I'm not much of a mechanic so I'm hesitant to offer advice.

BUT.... You can probably fab a drill guide out of aluminum bar stock... use one of the other head bolts to hold it in place.

Drill-press accuracy is probably good enough. But any machine shop (or DIYer) ought to be able to make one for you for not much cash. They could do a steel one easier than you can at home on a drill press.

Use an oversize hole at the clamping bolt so you have some wiggle-room.

Maybe try an undersize drill bit. Maybe even a left-handed bit if you can find one.

Good luck and let us know how it goes!
Reply With Quote