View Single Post
  #1  
Old 03-03-2017, 08:57 AM
R.Mojica R.Mojica is offline
Senior Member
 
Join Date: May 2013
Location: Rockland county, NY
Vehicle: 85 745 D24Tic M46
Posts: 190
Default Not getting fuel

So within the last month I removed my injectors and had them sent out to have the GTD nozzles installed and pop pressure set at 2400 psi. The car ran fine when I parked it about a month ago to do the injectors but now will not start. Fuel gauge was under a quarter of a tank and I had the car parked on a downward incline so first thing I did was put 5 gallons of fuel in it which brought me up to about a half a tank but still no luck getting fuel to the injectors. Cranking it with the first three injector lines loose and no fuel comes out. Fuel filter is full but I don't see any fuel in the clear hose going up to the injection pump. I have power at the fuel shut off solenoid. Battery he's good and I had a battery charger on it along with jumper cables going to my ram Cummins wich has two batteries to keep the cranking speed up as fast as possible. I'm not even getting any bubbles out of the injector lines. I'm kind of running out of ideas. If the fuel shut off solenoid is bad all of a sudden would that stop it from even bringing fuel up into the pump?
__________________
99 Ram 2500 24V Cummins 199k
85 745 TD M46 170k (silver)
85 745 TD M46 251k (white) Holset HY35, 4" turbo back, n/a intake manifold, intercooled, GTD nozzles set to 2400psi @18psi. super pumped
86 745 TD auto 254k sold
Several other current gasser Volvos.
67 122S 72k (barn find)
89 760 TIC for sale non running.
93 850 5spd 396K.
94 850 Turbo (race car) 12.55@112.4
95 850 T-5R wagon yellow 199k
04 V70R Titanium/Atacama M66 245k
04 S60 2.5T awd 255k
06 XC90 V8 305k
Reply With Quote