Thanks for the exhaust info, guys.
At this point I have the installed the fuel Ines, radiator and hoses, fan and shroud, and the valve cover.
In the next couple of days I plan to install the exhaust and intake manifolds, vacuum pump, add coolant and change the fuel filter. The cold start device is being a bit stubborn getting turned back to the normal position. There are a couple of pieces that I cannot identify which will be in attached photos. One is a nut and bolt that were among the nuts for the valve cover which was disassembled prior to me owning the car. The other is what looks like a bracket. Any help identifying these pieces would be appreciated!
Gettin' there...
|