Thread
:
How'd you Intercool your D24T?
View Single Post
#
38
05-01-2017, 09:19 AM
volvo-dennis
Member
Join Date: Aug 2014
Location: Denmark
Vehicle: 740 2.4 TD GLE 1986
Posts: 56
Hi Guys.
I have also Intercooled my D24+T this weekend. I had two options = NA manifold or original D24TIC manifold. I went with the TIC manifold. I thought it would be easier to make all the plumbing, by using that. I also wanted to keep a good airflow in the system, so thats why there are no "sharp" bends.
All the piping is 2", and the intercooler is a universal eBay type.
I'll post some pictures, and let them speak for themselves
...The eBay Cooler..
Right about there...
...I decided to keep on doing the green coloured theme.
Made some brackets for the cooler. They were not made as they were ment to be, because I had to have in mind that there also is an oil cooler in the way.
Old "T" manifold (right) vs. "TIC" manifold (left)
All the piping is just 2" exhaust parts. They will be painted when the pipes are done.
Mr. Spoiler was to be modified...
What do you think of the "740" writing on the cooler? Too much?..
/Dennis
volvo-dennis
View Public Profile
Send a private message to volvo-dennis
Find all posts by volvo-dennis