D24T.com

D24T.com (http://d24t.com/index.php)
-   Parts for sale (http://d24t.com/forumdisplay.php?f=10)
-   -   Any interest in modded D24 intake? (http://d24t.com/showthread.php?t=1129)

anders 09-19-2013 03:06 PM

Any interest in modded D24 intake?
 
3 Attachment(s)
I would like to see if there's any interest in a modded D24 intake. The intake is gasket matched, and slightly polished runners, best of all the rear rubber cap eliminated, welded shut with pressure port. say $125?

R.Mojica 09-19-2013 07:28 PM

Ya know...

745 TurboGreasel 09-19-2013 10:30 PM

I don't know, How much boost will the rubber cap hold?

anders 09-20-2013 05:55 AM

The first cap I blew off at 20 psi or so, the next one I glued on and T-clamped it. that held for few thousand miles before it got replaced with the welded intake. I like having the port on the back for a true boost reading also.
There is lots of force on the rubber cap when running 20lbs of boost, there is about 140 lbs of pressure total pushing on that rubber cap.... When it blows off it's loud! and not to mention embarrassing when your racing a rice burner and all the sudden your down to NA power!

anders 09-20-2013 09:42 AM

1 Attachment(s)
Ok, I'm in the process of building two intakes. An early version and a later version. ( early intakes don't have the notches in the plenum for the valve cover bolts) I just need to finish up some polishing the bead blast and clean them.

seanthom 12-15-2013 08:44 PM

I might be interested in this intake. Do you still have it. I would need the ports to be "D" shaped, which I could do. I'd run it on my 1.9 VW Diesel in my vanagon.

How wide (diameter) is the plenum opening?

Let me know if you still have it. Thanks.

-Sean

anders 12-16-2013 08:42 AM

I replied to your pm.

BluevanACD2005 02-22-2014 11:32 AM

Do you still have any of these?

anders 02-22-2014 12:32 PM

I have sold 5 of these so far, will only be modding two more to sell unless I come up with more of the intakes. Short answer is yes, I have the one in the back of the picture in post #5 ready to go.

BluevanACD2005 02-22-2014 01:58 PM

Where are you located? Can you take PayPal?

anders 02-22-2014 03:04 PM

I accept paypal.
Send me a pm for further details.

BluevanACD2005 03-04-2014 03:05 PM

Got it today. Looks good. Thanks!

Spenser


All times are GMT -8. The time now is 12:49 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.