D24T.com - D24/T INA pilot bearing group buy

The OEM pilot bearing for manual shift D24 and D24T engines has been NLA from Volvo for a few years now, and as has been noted in the past the versions available from aftermarket sources are inferior, featuring a plastic roller cage and no grease seal. Pictures comparing the two versions are below.

OEM INA style with grease seal:
http://imageshack.us/a/img407/9895/inad24pilotbrg.jpg

Aftermarket style (Kolb):
http://imageshack.us/a/img12/922/d24kolbpilotbrg.jpg

I am needing to source a new bearing for a guy's car I am working on due to a catastrophic failure of a previously-installed aftermarket style bearing -- one example of what can happen to them.
http://img600.imageshack.us/img600/1...0403120836.jpg

In an attempt to avoid using the aftermarket junk again, I began trying to find a way to acquire an OEM-style bearing for this engine. After some research I was able to determine that the correct OEM bearing is manufactured for Volvo by INA, and succeeded in securing a source for new bearings. The OEM bearing is INA # F-85706. I am able to source them for $10/ea (my cost not including tax and shipping), with a minimum order of two. There are 19 left in stock so I will probably buy a handful of them.

If anyone here is interested in also getting one of these bearings, send me a PM. I'll coordinate the buy and distributing bearings to those who are participating. Price per bearing will be $10, plus tax, plus a fraction of the shipping cost to get the bearing order to me, plus whatever shipping cost from my location (in Denver, CO) to you. I estimate total cost per bearing to be between $15 and $20 once all expenses are included.

I'd like to put in the order no later than the beginning of next week. Get 'em while they're hot.