intake gasket
Anyone have a source for intake manifold gaskets? Can't seem to find one anywhere and don't want to spend the time making one out of gasket material.
|
Have you tried rock auto?
|
rock auto does have them.
|
You could buy 4or 5 cyl versions to play with but i have seen the proper 6cyl gasket on at least 5 websites, also inexpensive.
I think i got my last 3 gaskets from eeuro or fcpgroton or ipdusa. I cant remember but you'll find it easily. |
Quite a delayed response, but does anyone have a part number for rock auto intake manifold gasket? If they are still available, they aren't coming up for an 85 or 86 740.
|
FCP Euro also has them in stock for $2.99
https://www.fcpeuro.com/products/vol...44-245-1257212 Make sure you install WITHOUT the gasket glue that many folks seem to like to use on this gasket, it's not a joy to scrape it off without damaging the aluminum surfaces if you have to have it off again. Some string or the bolts work fine instead to hold the gasket in place for installation, then it comes apart easy next time. |
One can simply buy two 8v gasser or diesel rabbit intake gaskets and cut them up to make what you need.
|
All times are GMT -8. The time now is 04:56 PM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.