12mm pump head?
1 Attachment(s)
I have found this injectionpump and was wondering if it is a 12mm head? It comes from a kad42 Volvo penta, where I also got the compressor from that I'm using on my hot rod engine. Hope some one can help me.Attachment 580
|
I think I would have to be logged in to YOUR account to view the picture?
Should be easy to tell by part number; NP-VE x/x F xxxx A R NP xx NP These two letters stand for the manufacturer, in th is case, Diesel Kiki VE Distributor-type injexction pump x number of cylinders x plunger diameter in millimeters F mechanical governor xxxx governor-controlled RPM number A design symbol R direction of rotation ( R for clockwise, L for counterclockwise) NP xx production serial number Also a head form an R pump won't work on an L pump, they must be same- rotation. |
It says
NR0460416006 VE6/11F1800L19-4 And a bunch of numbers underneath |
VE
6 cyl 11MM Mechanical gov 1800 pump RPM Left rotation |
I have talked with a bosch diesel mechanic and he said that the 0460 number means its a ve pump and the 416 means 11mm head. 406 for 10mm and 426 for 12mm head is that right?
|
Just like in post #2:D
I had to log in to view the pic despite already being logged in to the board, strange. |
Useful thread - thanks for the explanation of the model no.
Which rotation is ours - L or R? |
Quote:
You can verify by watching which way yours spins.:D |
All times are GMT -8. The time now is 07:21 AM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.