D24T.com

D24T.com (http://d24t.com/index.php)
-   Help! My car died! (http://d24t.com/forumdisplay.php?f=18)
-   -   volvo 244 d24 bw55 1979... (http://d24t.com/showthread.php?t=1334)

andrei.dorik 09-20-2014 03:36 AM

volvo 244 d24 bw55 1979...
 
Привет ребята я из России город Санкт Петербург... Недавно купил старую вольво244 оказалось у неё плохая головка блока (вся в трещинах) и ещё один нюанс....болты ее крепления М11 !!! Нигде не найти такую головку :-( :-( :-( может у вас есть головка под болты М11? Ну и сами болты тоже нужны. Вот блин попадос :-( забыл кстати....... Двигатель d24 модель cw

745 TurboGreasel 09-20-2014 11:51 AM

Cracks like this
http://img.tapatalk.com/d/13/12/25/9yvy2apa.jpgare normal, and nothing to worry about.

But 11mm motors are not a great starting point.

andrei.dorik 09-20-2014 03:27 PM

Quote:

Originally Posted by andrei.dorik (Post 9089)
Привет ребята я из России город Санкт Петербург... Недавно купил старую вольво244 оказалось у неё плохая головка блока (вся в трещинах) и ещё один нюанс....болты ее крепления М11 !!! Нигде не найти такую головку :-( :-( :-( может у вас есть головка под болты М11? Ну и сами болты тоже нужны. Вот блин попадос :-( забыл кстати....... Двигатель d24 модель cw

Quote:

Originally Posted by 745 turbogreasel (Post 9093)
cracks like this
http://img.tapatalk.com/d/13/12/25/9yvy2apa.jpgare normal, and nothing to worry about.

But 11mm motors are not a great starting point.

Привет дружище :-) я знаю, что на этих моторах допускаются трещины между сёдлами . .. У меня все намного хуже :-( в моей головке трещины в 4, 5, и 6 цилиндрах. И получается что охлаждающая жидкость попадает в эти цилиндры. А от 740 головку не поставить (там крепление болтами м12) короче засада во всех смыслах... А ещё идут газы в расширительный бачок и масло попадает в охлаждающую жидкость :-( :-( :-(

andrei.dorik 09-23-2014 05:39 AM

Hi friends. Something not to many answers. I think in Amerika Russian language do not know very many people. :-( Now try to deal with the phone. it has a translator :-)

andrei.dorik 09-23-2014 06:02 AM

Describe my problem.... on my car volvo 244 installed cylinderhead with bolt m11 It is very rare.... Under the bolts m12 heads a lot, but my car dont need them. In my head cracs in 4 5 and 6 cylinders and the coolant enters the engine. and still going gases in the system and oil too :-( :-( I forgot completely......engine model D24 model CW. :(

andrei.dorik 09-23-2014 06:08 AM

may you have the cylinderhead on the engine D24 under m11 bolts? :( my email is....andrei.dorik@mail.ru


All times are GMT -8. The time now is 02:27 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.