tachometre wiring diagram
hi i really need the tachometre wiring diagram so any one can have one or explane to me how to wire the tachometre thanks:)
|
If i remember right you were asking about tacho before, and didnt have "W" plug on your alternator? Since, that makes things WAY harder.
|
BTW, i need the wiring too. I took off my instrument cluster two times, and resoldered all joints - nothing changed - tach is not working. Then I found some corroded and some cut cables on the alternator - it was charging, these were some other signals. I cannot see if there is some letters on the connectors without pulling it, which I cannot do right now.
I have two cables and one connector with two pins connected to the alternator - which one is which? My tacho is now working, but it is sluggish and have slow response, and it seems to me that it is not working correctly - it's hardly gets past 2.5K rpm. Any suggestions? |
The alternator could just be going bad.. Are you sure the belt isn't slipping?
Jason |
Mine doesnt always come to show idling speed when releasing throttle and stopping, its like everytime different, between 800-1100,
when its set to 900. But when revving, it will in my opinion work properly. I believe problem is on instrument cluster. |
So, is there some schematic with explanation of the extra wires? I could not find nothing in VADIS, and I don't have a green book for D24T.
As I said, I have two cables + one connector with two wires, beside these that are actually for charging. What are these wires for, except for the one that is signal for the tachometer? |
Better you look in several related websites for finding some good answers.
|
All times are GMT -8. The time now is 08:45 AM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.