D24T.com

D24T.com (http://d24t.com/index.php)
-   Performance and aftermarket (http://d24t.com/forumdisplay.php?f=7)
-   -   Max with original pump? (http://d24t.com/showthread.php?t=98)

volvo d6 09-25-2009 02:53 PM

Max with original pump?
 
What is the maximum you can take out of the original pump with all thing turned on max? I am going to mount a big turbo and intercooler.

cuaz64 09-25-2009 03:37 PM

Somewhere somebody said that 250HP, later you have tu use the injection pump from a Penta engine.

Jason 09-25-2009 07:02 PM

Max fuel flow is related to the size of the head and lift of the cam plate. I would get rebuilt injectors and have them set at the high end of the spectrum of opening pressure, that should help with atomization. From there, you can go to a 11mm head. There are also higher lift cam plates, though you would need a new head to go with that anyway, as installing a higher lift plate once the head has already worn in would be bad. Also, for full potential of the pump, a lift pump should be installed. If you can find a diesel compatable pump over there that pushes around 15 psi you will be good. Much over 20 psi and the front shaft seal can start to leak or blow out.

Jason

Jason 09-25-2009 07:04 PM

If you read through the modding the injection pump post I put up, it talks about the AFC housing... You can get more fuel if you grind the fuel pin to allow the pin that travels on it to go in further. You can buy them (they are adverstised for the cummins diesel engines), but you can just as easily weld up one side and then grind the other side deeper. Just make sure you have a very smooth polished surface for the pin to ride on when your done.

Jason

MRDART 10-03-2009 07:18 AM

Around 150 hp my local dieselguru tells me is possible with another turbo and with standard parts in the fuel pump.... Injectors are good for more power than the engine can handle...

Jason 10-03-2009 09:32 PM

I bet I'll put down more than 150 at the wheels... That pump can push quite alot of fuel. I don't even have the collar off mine and compaired to my friends D24t it is a hell of alot faster!

Jason

BlackBox 10-09-2009 06:33 AM

You could also help offset fueling deficiencies of your pump by running Methanol injection under high boost conditions.

axL_ 11-20-2009 04:42 PM

rotorpumps are often oversized an d24 pump delivers almost double as much as an mercedes 300tdt pump

axL_ 11-25-2009 04:44 PM

max hp is not over 160 without modded pump

IceV_760 11-25-2009 10:32 PM

Quote:

Originally Posted by axL_ (Post 1391)
max hp is not over 160 without modded pump

Agree at it goes somewhere 150-170hp.


All times are GMT -8. The time now is 08:26 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.