Torque specs
Hi
I'm currently rebuilding my D24t engine since it's "only" gone 498000km and i had no compression on cylinder number 1. I have forgot to buy the service book for the D24, but is there anyone who has the tourque specs for the different parts of the D24? Thinking of where to piston rods, head bolts and camshaft. =) Any help would be greatly appriciated, hopfully I'll have the engine up and running very soon. |
I think you can pull a PDF file of the engine manual on Kjet.org. I would be careful with the rod bolts as some are the TTY type, I don't know if they can be reused. I will try and post a picture tonight of the different bolts.
|
My greenbook said;
Quote:
|
Is that for fiber HG or for steel HG? I think it's for fiber; remember seeing revised procedure for (steel?) replacement HG somewhere.
|
I apprciate the answers. But i have raceware head bolts, so the specs would be different.
Im primarely looking for tourque for piston rods. I have changed pistons rings and rod bearings |
1 Attachment(s)
I think rod bolts are torqued to 33ft lbs. Here is a picture of the different rod bolts. TTY is the one on top, they recommend replacing them when replacing bearings. The head on TTY bolts has no grading on it, and the threaded portion is longer.
|
1 Attachment(s)
I have the following from a copy of the green book:
|
All times are GMT -8. The time now is 01:18 PM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.