D24T.com

D24T.com (http://d24t.com/index.php)
-   Member Showroom (http://d24t.com/forumdisplay.php?f=19)
-   -   Beppe D24t Brekizer (http://d24t.com/showthread.php?t=1810)

Brekizer 08-29-2017 01:11 AM

Beppe D24t Brekizer
 
Goodday,

Thought I'll show some pics of my 740.

https://volvo700vereniging.nl/sites/...s/IMG_1150.JPG
https://volvo700vereniging.nl/sites/...s/IMG_1080.JPG
https://volvo700vereniging.nl/sites/...s/IMG_1172.JPG
https://volvo700vereniging.nl/sites/...728_184510.jpg
https://volvo700vereniging.nl/sites/...731_112640.jpg
https://volvo700vereniging.nl/sites/...730_020343.jpg

I call her Beppe because its an old car who always tries to take care of me,
Beppe means Grandma in Frisian.
The engine made more than a million Km's (from my old 740) rest of the car 700.000km's

Engine : D24t
Intake : N/A of VW LT
Turbo : stock turbo @ 1.7 bar
Gearbox : Placed a M90 because of this :
https://www.youtube.com/watch?v=CVeCq95r5kI
Fuel pump : Screwed up like a morron.
Air filter : Stock airbox with Pipercross air filter element.
Intercooler : Ebay intercooler with china piping

volvo-dennis 09-01-2017 02:36 PM

Nice to see another D24T equipped vehicle :) Feel free to add some more pictures of the enginebay ;)


/Dennis

Brekizer 09-01-2017 11:45 PM

Quote:

Originally Posted by volvo-dennis (Post 12154)
Nice to see another D24T equipped vehicle :) Feel free to add some more pictures of the enginebay ;)


/Dennis

Pics of the engine bay are coming tomorrow I think, first I need to bleed my clutch, place my other radiator and hopefully install my intercooler piping..

Later I'm going to powdercoat my valve cover, distribution cover and intake, don't know what colour yet :rolleyes:

Brekizer 09-03-2017 10:58 PM

Nooooooooo!
 
Well, I've fucked up.

I found out that my slave cylinder was leaking, that's why I couldn't bleed it.
So just remove it, place my backup cylinder and everythings fine hé?

No, I couldn't remove my old slave cylinder, I've never seen anything so stuck :eek:

I used loosening oil, I've tried to turn it with a big set of pliers and eventually I've tried to tap it with a small hammer..
I didn't use heat because everything is a bit oily on the underside of my car, we've had a fire before.. don't want it again.

The result :
https://myalbum.com/photo/faJpyvpYQOep/360.jpg
ARRGHHG :mad::rolleyes:

Even when the part is broken off, I still can't remove it.. not even in the vice and with a bigger hammer.. it won't budge.

So yeah, now I need to create something that will hold the new slave cylinder..

Brekizer 09-05-2017 01:25 AM

Small update :

Found a piece a metal and I'm fabricating a slave cylinder holder out of it


https://volvo700vereniging.nl/sites/...gshalder_0.jpg

volvo-dennis 09-08-2017 11:57 AM

Any progress on the slave-cylinder-situation? I hope you sort it out :)

Brekizer 09-10-2017 01:11 AM

She's up and running again!

Testing if de plate fits :
https://volvo700vereniging.nl/sites/...s/hYeDNcTx.jpg

Milled a hole in it for the slave cylinder -edges still rough from grinder but sanded it afterwards-
https://volvo700vereniging.nl/sites/...s/QZNgegPn.jpg
https://volvo700vereniging.nl/sites/...s/xFoVp2vI.jpg

Painted, fitted and up and running!
https://volvo700vereniging.nl/sites/...s/AY4sxRgT.jpg


They aren't the best pics but at least you can see what's what :)

Now I need to work out the intercooler, especially what kind of intercooler would be best..
Anyone got a part number of the Iveco intercooler?

Brekizer 09-20-2017 11:27 PM

my new intercooler :
https://myalbum.com/photo/6aZYkQN4EwN6/1k0.jpg

Brekizer 09-26-2017 03:40 AM

Update time!
 
I've fitted my intercooler :)
https://myalbum.com/photo/w7SOYTuSMtDn/540.jpg
https://myalbum.com/photo/1OQQtNxpbKjP/540.jpg

I don't really notice allot of difference, or even a difference.. :confused:
She pulls just as strong as always?
https://myalbum.com/photo/xQzezMeur5H7/540.jpg :p

And for the fun of it, I've cleaned her up a little bit.
https://myalbum.com/photo/zYpGjir4I0r4/540.jpg

@ Dennis, pics of a clean engine bay are coming later, didn't had time to do so :p

Brekizer 09-29-2017 02:32 AM

Benchrun!
 
Had my car on the rolling road today,
https://myalbum.com/photo/zn8awiAWD6YO/540.jpg
not disappointed :
https://myalbum.com/photo/82bG8L8w8w9Z/540.jpg

But not enough.

I need to fit my GTD nozzles, and I want a 12mm pump heads, but where to find it?


All times are GMT -8. The time now is 08:16 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.