Discussion of any performance or aftermarket mods related to the engine, drivetrain, or any other part of the car.
*** Please keep this thread uncluttered by keeping discussion to a minimum. I would like this to be a "how to" resource with pics and info only....
I did a water/alcohol injection setup over the weekend with great results. Since I still dont have the manifold I want and a regular intercooler,...
Well, I had a post going detailing the T-5 swap, and while trying to delete some clutter and move it over to the performance section and make it into...
First, and most important, your engine needs to be in good mechanical shape before trying to up the performance. Besides the obvious things like...
ive been thinking about finding one of these engines and throw it into a toyota 4x4 truck. i cant find any info on the bolt pattern. is it the same...
Hello, I got the D24tic with t3/t4 turbo running 58psi on boost and 12mm injection pump and the gov is most likely modifyed. The engine was...
Anyone have any knowledge on this turbo? It has variable veins which as it was explained to me controls the boost instead of having a wastegate. Also...
My 940 is a 1995 estate with a LSD (locker) diff, i have a few extra guages on the centre consol to monitor the engine and auto box when towing...
I have seen big trucks with engine brakes, even the newer 6.7L cummins has an engine brake... so I was thinking making an exhaust brake for the D24....
Because the D24TIC has a bad reputation in cooling i was wondering what temperatures my D24TIC is running at. I made a digital temp.gauge out of a...
After having the cone filter stuck on the turbo over the winter, I noticed now that it has gotten hot and I have the rad fan back on, the hot side of...
Is it safe to crank the boost a little up without having an intercooler? And how much it is safe? Will it have the desired effect? I mean will the...
Hello, we begin our project of biturbo 760 td, To start I have changed the original alternator (55 amp) to a 80 amp. from 940 d24tic. and the...
Hi guys i have just got a 940 td estate j reg and i intend to play with it a bit i have read some about turbos and thinking about using a garatt...
After sitting around these past few days... I got to thinking... what if I could get a small turbo to spool up to about 15lbs on a 1st gear pull to...
I just wanted to see if anyone is using a turbo that is something other than the stock fitment TA0304 Garrett. Perhaps, something more modern,...
Does anyone know which clutch cable I have to use for an auto to manual/gas to D24T swap in a 240? The diesel cable is different from the gas. There...
I got my sweet new ARP head studs today 190$ dollars later and they look sweet! now i need to get my steel head gasket any one no where to get one or...
Need N/A manifold to complete build, does anyone know where I can find one? I have been calling salvage yards all day and nothing, any help is much...
Well, the result was my qtr mile time was improved by more than a full second! I didnt' quite make it into the 15's, but it has it in her if I could...
Heard about one that used the M-pump from a 300d on a bmw 2,4 that uses the same VE pump just like the D24 and I wondered if the M-pump could be used...
Took a while to get the Monark injectors built as I was busy with work and other projects. The 760 sat dead for about the past 6 weeks with the...
Hi, I have a D24 TIC with a modified diesel pump. I wondered if the nozzles could be changed from original to something that could deliver more...
Hi Folks, I would like to intercool the D24T fitted to my 940 and wondered if anyone here could offer some guidance. From what I can work out...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
