PDA

View Full Version : Options on adding a turbo to a 240 series


anders
10-17-2011, 06:32 AM
Ok guys, I need some expert advice on adding a turbo to a 240. I got my engine almost ready to drop in but I was wondering on what method would be best to turbo it. I'm using a 1985 D24t, I will be adding ARP head studs, Canton Oil filter relocation, B&M Supercooler with built in fan and thermostat for the oil cooler. I will be using the M46 for now- T-5 later in the build. My question is: Will the stock turbo on a d24t clear the strut tower and or frame rail with factory D24 slant? I have modified my D24 oil pan for the turbo drain, but I acquired a D24T bellhousing. So If I modify the cross member, and use the D24t mounts and bellhousing will I have the clearance with the N/A intake when the hood is shut? Thanks.

anders
10-17-2011, 11:45 AM
Also, know of a good turbo rebuilder?