D24T runs!

[markbos4]

This morning I started the engine for the first time, after a few cranks it ran almost instantly. I made a short movie of the engine running: http://www.youtube.com/watch?v=JXjnBblqYX0
Things to do:
Painting the valve cover
Putting the inlet manifold and turbo from a D24TIC on it.
Putting it in the car ofcourse...:p

[240diesel]

Hi Mark, you've done a wonderfull job, engine is brandnew en running fine!
Holland is a small country but we have much D24's enthousiasts.

Volvo for live, of course with the D24T(ic) in front!!

[ngoma]

Congradulations! Please share your process for priming the IP/injector lines/injectors.

[markbos4]

I've put a plastic tank above the engine, so the diesel went to the pump by itself. Then i disconnected the fuellines at the injectors, cranked it till the diesel came out of the fuellines. Then I fastened the lines and started it. It ran almost instantly. For the oilpump: I filled the bore in the block to the oilpump with oil (at the oilfilter), and oilpressure was already there when i was cranking!

[v8volvo]

Looks great and sounds even better!

How did you get it started with no bellhousing to mount the starter to, though??

[markbos4]

Starter is mounted on the engine and you can bolt the starter from behind..